Warning

You are reading the documentation for an older Pickit release (2.3). Documentation for the latest release (3.4) can be found here.

Manually define the Pickit macros

Here we’ll explain how to define the Pickit macros manually without overwriting any existing macros.

Define macros

Booting the controller in normal mode, the macros can be defined manually. To do this go to SYSTEMSETUPMACRO INST..

Note

In order to use the example Pickit files, the macros should be defined in the exact same order as shown in the image below. Otherwise, the example files should be adapted with the correct macro ID’s before being run.

EXECUTE JOB

SUSPEND JOB

MACRO1

PI_CALIB

********

MACRO2

PI_LOOK

********

MACRO3

PI_WAIT

********

MACRO4

PI_NEXT

********

MACRO5

PI_CFG

********

MACRO6

PI_SAVE

********

MACRO7

PI_RUN

********

MACRO8

PI_GPPD

********

MACRO9

PI_CAPTU

********

MACRO10

PI_PROCE

********

MACRO11

PI_BUILD

********

Macro argument definition

For macro PI_CALIB and PI_CFG, arguments need to be defined.

To do this select the MACROXX text and press SELECT.

Here set ARG. SET to USE and fill in COMMENT1, TYPE and COMMENT2. Press PAGE, select define 2, and fill in DISPLAY and EXPRES”N. The values that need to be filled in can be found in the table below.

Data

ARG.no

define 1

define 2

COMMENT1

TYPE

COMMENT2

COMMENT1

DISPLAY

EXPRES’N

PI_CALIB

1

USER FRAME

B CONST

USER FRAME

ON

U/FRAME:

PI_CFG

1

SETUP

I CONST

SETUP

ON

SETUP:

2

PRODUCT

I CONST

PRODUCT

ON

PRODUCT:

3

USER FRAME

I CONST

1-63

USER FRAME

ON

U/FRAME:

4

TOOL

I CONST

1-64

TOOL

ON

TOOL:

5

TIMEOUT

I CONST

ms

TIMEOUT

ON

TIMEOUT:

If the arguments are set correctly, the screen will be similar as shown below. Now the Pickit macros are correctly defined, and you’re all set to continue with the Yaskawa integration.

../../_images/yaskawa-macro-arguments.png