Warning

You are reading the documentation for an older Pickit release (2.4). Documentation for the latest release (3.4) can be found here.

Pickit processors 2.0

Note

This article gives a description of an older version of the Pickit processor. It’s intended for users of Pickit 2.0 who have upgraded their Pickit software to a 3.0 version or later.

Refer to this article for more details about the current version of the Pickit processor.

../../_images/processor-two.jpg

Technical specifications

The technical specifications in this section apply to both processor versions.

  • Processor: 6 cores (12 threads) at 3.7 Ghz

  • 19-inch server: rack compatible (2U)

  • Temperature: -20 °C to 70 °C

  • Vibrations: Operating, 5 Grms, 5-500 Hz, 3 axes

  • IP rating: IP20

  • Humidity: ~95% @ 40 °C (non-condensing)

  • Input Voltage Range: 100 - 240 V

  • Input Current: 50 A @ 115V AC; 100 A @ 230 V AC

  • Input Frequency: 47 - 63 Hz

Processor ports and power supply

The front side of the processor contains a lid, which can be opened by rotating the lock handle clockwise. A few ports (which are not used by Pickit) and some buttons are located under the lid. In case of a power failure while the computer is on, it will restart automatically when power is restored.

../../_images/processor-two-back.jpg

All labeled I/O ports and the power connector are placed on the back side of the processor as shown above. In order to connect the Pickit processor to a power supply, use the provided IEC cable (C13).

Warning

In case the Pickit processor is positioned vertically and sideways, the air inlet shall not stay at the top. This may affect the ventilation process.

Power consumption

  • While turned off: 25 W

  • Booting: 115 W

  • Idle: 70 W

  • Heavy processing: 350 W