Active stereo camera cables

The active stereo cameras use a single Ethernet cable for both data and power, thanks to the Power over Ethernet (PoE+, IEEE802.3at).

The cable uses a HARTING PushPull RJ45 connector on the camera side (IP65/67) and a standard RJ45 connector on the processor side. It is Cat.6A rated, torsion resistant, and compatible with robot drag chains. It is available in lengths of 5m, 10m, and 20m.

Pickit active stereo camera next to its green Ethernet cable with a HARTING PushPull RJ45 connector on the camera end and a standard RJ45 plug on the processor end

Make sure that, on the camera side, the connector is tightly latched to its plug and cable routing best practices are followed.

Connection diagram: robot connects to the ROBOT port and Pickit camera to the CAMERA port of the Pickit processor (required); an external computer on the YOUR PC port runs the web interface and the LAN port links to the Internet for remote service (optional)