Warning

You are reading the documentation for an older Pickit release (2.0). Documentation for the latest release (3.4) can be found here.

Exercise detection of an empty bin

This exercise involves creating a detection strategy to detect an empty bin.

Level	Advanced
Duration	< 15 min

Requirements

Before starting on the exercise we advice you to read following articles:

• Region of Interest

• Detection: Pickit Flex

• Explaining the Flex detection parameters

• How to detect an empty ROI

Task

Three bins are shown beneath the camera: one that is still rather full, one completely empty and the last one is almost empty. Your task is to create a detection strategy that detects if a bin is (almost) empty.

Given: Region of Interest settings for each box.

• Bin 1: X 10 - 160mm, Y -10 - 260 mm, Z 5 - 140 mm.

• Bin 2: X 220 - 370mm, Y -10 - 260mm, Z 5 - 140mm.

• Bin 3: X 420 - 570mm, Y -10 - 260mm, Z 5 - 140mm.

Hint: No object detection could indicate an empty bin.

How to get started

Follow the next steps to complete the exercise.

1. Download the snapshot file here on your device.

2. Connect your device to your Pickit processor.

3. In the user interface of Pickit, go to the Files tab.

4. Press Upload and select the file.

5. The file can now be found in snapshots/uploads.

6. Finish the exercise.

7. Press the snapshot button on the lower left corner of the view.

8. Name your snapshot ‘Solution_Pattern_boxes/coilsinner/coilsouter_1_CompanyName’.

9. Download the file from the snapshots folder.

10. Send your solution to support@pickit3d.com to receive feedback.