Warning

You are reading the documentation for an older Pickit release (3.0). Documentation for the latest release (3.4) can be found here.

Robot-independent Pickit integration

The articles in this section describe the interaction between Pickit and a robot in a way that is independent of the robot brand. As such, they provide all the necessary information for integrating a new robot brand into Pickit. Such an effort requires implementing two layers, presented below: interface and communication.

Interface

The Application Programming Interface (API) layer is what the robot programmer interacts with. The following articles can be used as a reference on how to structure the API of a new robot integration, and how the API should be used from robot programs to perform vision-guided pick and place with Pickit.

The articles present content in robot-independent pseudo-code. When developing a new integration, code examples need to be adapted to the syntax, features and best practices of the target robot programming language, but the key concepts and ideas remain the same.

• The Pickit interface
• Simple pick and place program
• Complete pick and place program
• Calibration program
• Calibration validation program

Communication

The communication layer takes care of the low-level data exchange between the robot and Pickit by implementing the Pickit socket communication protocol. This part of the integration is typically not visible to the robot programmer, and is abstracted by the interface layer.

Pickit also supports communication via ROS. Refer to the following article about the Pickit ROS interface to learn more.