Active stereo camera cables

The active stereo cameras use a single Ethernet cable for both data and power, thanks to the Power over Ethernet (PoE+, IEEE802.3at).

The cable uses a HARTING PushPull RJ45 connector on the camera side (IP65/67) and a standard RJ45 connector on the processor side. It is Cat.6A rated, torsion resistant, and compatible with robot drag chains. It is available in lengths of 5m, 10m, and 20m.

Make sure that, on the camera side, the connector is tightly latched to its plug and cable routing best practices are followed.